The PAC dog containment system is ideal where you wish to contain one or more dogs without using a containment fence. Each dog wears an active electronic dog control collar unit. This dog control unit is designed to pick up a low strength radio signal, when the dog becomes close to the electronic boundary. 

Automatic for Ease of Mind

The containment system is continuous and automatic. When a dog moves into the Active Zone (1-2 Metres from the wire) he picks up a radio signal from the wire. The collar emits an audible bleep as a warning, and if the dog does not withdraw within a few seconds, he receives a corrective electrical stimulus. The system detects the dog's speed and position, so if he runs at the fence the system is activated immediately and its intensity increases as he progresses towards the boundary.

Fence control unit

The electronic control unit should be installed indoor or undercover, it generates the radio signal for the loop-wire. The signal strength determines the Active Zone width and can be adjusted and monitored at the unit. It has a timer controlled charger for the Collar Unit.

Electronic collar unit Full Fence Kit Includes: 1 x AC/DC Power supply, 1 x Active Collar, 1 x Control Unit, 1 x Charging Lead, 1 x Neon Test, 1 x Loop Wire Connection Kit, 1 x Probe Kit and Instructions.

Loop Wire

The loop wire is a low cost multi-cored PVC covered cable that can be purchased from us or your local electrical wholesaler. The two tails of this loop connect to the Control Unit to complete the circuit.

"....I sometimes think people are concerned that this type of system can be unkind to a dog and I would like to assure any prospective customers that this is far from the truth. Thank you for your recommendation and we shall certainly recommend the system to other dog owners...." 

Customer of Direct Fencing